GRWA Product Logo Printing Style Type And Process Overview

GRWA product logo printing style types and processing processes are diverse, including stamping, laser printing, laser engraving, hollow, water transfer, stickers, etc. The following is a detailed introduction to these style types and processing processes:

1.Press

Features:

(1) Physical deformation: Pressure is applied to the material through the stamping die to make it plastic deformation, thus forming a logo pattern or text.

(2) Scope of application: small logo printing and processing of metal, plastic and other materials.

(3) Production efficiency: suitable for mass production, the cost is relatively low.

Formation mode:

(1) Design stamping die, die engraved with logo pattern or text.

(2) Put the material into the mold and apply pressure for stamping.

(3) After the stamping is completed, the required logo pattern or text is formed on the material.

2. Laser printing

Features:

(1) Non-contact processing: the laser beam directly acts on the surface of the material, without contacting the material to avoid mechanical damage to the material.

(2) High accuracy: the focus of the laser beam is very small, which can achieve high-precision printing effect.

(3) Fast speed: It is basically suitable for logo printing and processing of various materials.

Forming mode:

Using computer to control the trajectory of the laser beam. The laser beam scans the surface of the material and forms a logo pattern or text by burning or melting the surface.

3. Laser engraving

Features:

(1) High precision: laser engraving can achieve very fine pattern and text engraving, smooth edge without burrs.

(2) Permanent: the carved logo pattern or text is permanent and not easy to wear.

(3) Material adaptability: suitable for metal, plastic and other materials processing.

Formation method: 

Similar to laser printing, the computer-controlled laser beam is burned or vaporized on the surface of the material to form a concave or raised logo pattern or text.

4. Hollow out

Features:

（1）Permeability: The hollow logo has permeability, which can increase the beauty and design sense of the product.

（2）Complex process: The hollowing process is relatively complex, requiring accurate mold design and processing technology.

Formation method: 

Through stamping, mold or laser engraving, etc., the required hollow pattern is formed on the material, the hollow part can be fully penetrated, or it can be partially penetrated, depending on the design requirements of the customer.

5. Water transfer

Features:

（1）Rich color: Water transfer printing can achieve a variety of colors of patterns and text printing, bright colors.

（2）Wide range of application: suitable for a variety of complex shapes and materials of product surface decoration.

Formation mode:

The film printed with the logo pattern is placed in water, and the special properties of the water pressure and transfer film are used to transfer the pattern to the surface of the product.

After drying and curing, the pattern can be firmly attached to the surface of the product.

6.Stickers

Features:

(1) Strong flexibility: stickers can be replaced at any time according to need, high flexibility.

(2) Low cost: the production cost of stickers is relatively low, suitable for small-scale production or personalized customization.

Formation mode:

Make stickers printed with logo pattern and paste the stickers on the specified position of the product surface.

To sum up, when choosing Logo style and processing technology, factors such as brand characteristics, product materials and application scenarios and customer needs should be fully considered to ensure the perfect presentation of brand identity.