Exhaust Valve Installation Process

The automobile exhaust valve is a valve installed in the automobile exhaust pipe, which is generally used to adjust the size of the automobile exhaust volume and the length of the exhaust gas discharge time. Automotive exhaust valves are generally made of metal materials, mainly composed of valve body, spring and casing.

Steps to install the exhaust valve:

Measure the length of the exhaust pipe: Before installing the exhaust valve, you need to measure the length of the exhaust pipe to determine where the exhaust valve should be installed, usually behind the muffler.

Preparing tools and materials: Before installing an exhaust valve, prepare the following tools and materials: exhaust valve, wrench, aluminum oxide paint, and sealant.

Start installation: Weld the exhaust valve to the exhaust pipe.

Apply sealant: Apply a layer of sealant around the holes in the exhaust valve. This step can help prevent air leakage from the exhaust pipe.

Apply alumina paint: Apply a layer of alumina paint to the exhaust pipe, which can be beautiful and prevent rust.

Test: After installation, you can start the car to test and check whether the exhaust valve has air leakage.

GRWA focuses on the production of auto parts, pays attention to research and development and quality control, and strictly controls every process to ensure product quality and performance.Choose GRWA automotive exhaust valve, beautiful surface, faster driving response, stable performance, high precision, so that your car on the road attention, full of power.